Browsing MF - İM Makale Koleksiyonu by Issue Date
Now showing items 1-20 of 77
-
Process optimization and filtration performance of an anaerobic dynamic membrane bioreactor treating textile wastewaters
(Academic Press, 1 November)The study aimed at investigating the performance of anaerobic dynamic MBR (AnDMBR) for the treatment of synthetic textile wastewater. A laboratory scale anaerobic bioreactor was operated to test nylon mesh support materials ... -
3D Numerical Modeling of a Single Pipe Pile Under Axial Compression Embedded in Organic Soil
(Springer, 1 October )The objective of this paper is to numerically study the behavior pipe pile under axial compression embedded in organic soil has been numerically predicted. The pipe pile used in the study has been produced by steel and it ... -
Self-forming dynamic membrane bioreactor for textile industry wastewater treatment
(Elsevier B.V., 10 january)The robustness of anaerobic dynamic membrane bioreactor (AnDMBR) for synthetic textile wastewater treatment was investigated. Textile wastewater may contain high concentrations of NaCl and sulfate, hence their impact on ... -
A novel formulation of the flexural overstrength factor for steel beams
(2013)The ductile design of steel structures is directly influenced by the flexural behaviour of steel beams,which should be sufficient to allowplastic hinges to rotate until the collapsemechanismis completely developed. To ... -
Strength and transport properties of steam cured and water cured lightweight aggregate concretes
(ELSEVIER SCI LTD, 2013-12)In this paper, effect of steam and water curing on the compressive strength development and transport properties such as water sorptivity, rapid chloride ion permeability, and gas permeability of concretes containing various ... -
Combined effect of steel fiber and metakaolin incorporation on mechanical properties of concrete
(ELSEVIER SCI LTD, 2014-01)This study reports the results of an experimental study on mechanical properties of plain and metakaolin (MK) concretes with and without steel fiber. To develop the metakaolin included steel fiber reinforced concrete ... -
Enhancement of shrinkage behavior of lightweight aggregate concretes by shrinkage reducing admixture and fiber reinforcement
(ELSEVIER SCI LTD, 2014-03-15)This paper presents the results obtained from an experimental study conducted to investigate the effect of shrinkage reducing admixture (SRA) and steel fiber addition on the performance properties of lightweight aggregate ... -
Modeling and analysis of the shear capacity of adhesive anchors post-installed into uncracked concrete
(ELSEVIER SCI LTD, 2014-04)This paper reports the results of an analytical study to predict the edge breakout shear capacity of single adhesive anchors post-installed into uncracked hardened concrete. For this purpose, an experimental database for ... -
Analytical prediction of available rotation capacity of cold-formed rectangular and square hollow section beams
(ELSEVIER SCI LTD, 2014-04)In this paper, a soft-computing based study aimed to estimate the available rotation capacity of cold-formed rectangular and square hollow section (RHS-SHS) steel beams is described and novel mathematical models based on ... -
Optimization of concrete mixture with hybrid blends of metakaolin and fly ash using response surface method
(ELSEVIER SCI LTD, 2014-04)This paper presents the experimental results of a research carried out on the strength and permeability related properties of high performance concretes made with binary and ternary cementitious blends of fly ash (FA) and ... -
Prediction of the flexural overstrength factor for steel beams using artificial neural network
(TECHNO-PRESS, 2014-09)The flexural behaviour of steel beams significantly affects the structural performance of the steel frame structures. In particular, the flexural overstrength (namely the ratio between the maximum bending moment and the ... -
Behaviour of steel cap plate connections: Experimental tests
(KOREAN SOC STEEL CONSTRUCTION-KSSC, 2014-09)This paper reports the results of a study conducted to investigate the behaviour of steel cap plate connections. In the analysis and design, connections are characterized as either rigid or pinned and between these two ... -
Stability of EG cylindrical shells with shear stresses on a Pasternak foundation
(TECHNO-PRESS, 2014-10)This article is the result of an investigation on the influence of a Pasternak elastic foundation on the stability of exponentially graded (EG) cylindrical shells under hydrostatic pressure, based on the first-order shear ... -
Effect of volcanic pumice powder on the fresh properties of self-compacting concretes with and without silica fume
(SPRINGER, 2014-11)The current study presents an experimental study conducted on the effectiveness of volcanic pumice powder (VP) on the fresh properties of self-compacting concretes (SCCs) with and without silica fume (SF). In the first ... -
Modelling total phosphorus input pathways in the Porsuk reservoir catchment in Turkey
(SPRINGER, 2014-12)As a country in the Mediterranean region, Turkey must face the effects of climate change on water quality and quantity. Decision support systems are accepted as useful and practical tools for the protection and management ... -
Strength and permeability properties of self-compacting concrete with cold bonded fly ash lightweight aggregate
(ELSEVIER SCI LTD, 2015-01-15)This paper presents the results of an experimental study on the hardened characteristics of the self-compacting concretes made with cold bond fly ash lightweight aggregates. Binary and ternary use of fly ash (FA) and silica ... -
A simple formula for estimating the column ultimate load with effect of semi-rigid connections
(KOREAN SOC STEEL CONSTRUCTION-KSSC, 2015-03)Calculating the ultimate load of a framed column in sway structures involves, in the currently used design method, the calculation of the column effective length and utilizing the interaction formulae or tables. Therefore ... -
Numerical modeling of time to corrosion induced cover cracking in reinforced concrete using soft-computing based methods
(SPRINGER, 2015-06)Reinforced concrete (RC) is one of the most commonly used composite materials in construction industry. Corrosion of reinforcing steel embedded in concrete is a crucial issue leading deterioration of RC structure. In this ... -
Fall cone tests on clay-sand mixtures
(ELSEVIER SCIENCE BV, 2015-06-18)Fall cone tests were performed on clay-sand mixtures to investigate the variation of liquid limit with sand content and the link between undrained shear strength and water content for various sand contents in the mixtures. ... -
Analysis of a landfill gas to energy system at the municipal solid waste landfill in Gaziantep, Turkey
(TAYLOR & FRANCIS INC, 2015-08)This paper presents an analysis of the electricity generation from municipal solid waste (MSW), via landfill gas valorization technology, at the landfill of Gaziantep City, Turkey. Rapid increase in population, and industrial ...
