Synthesis of new functionalized Calix[4]arene modified silica resin for the adsorption of metal ions: Equilibrium, thermodynamic and kinetic modeling studies

Abstract

In this study, a new efficient resin-based material has been synthesized through the surface modification of silica by functionalized calix[4]arene and applied for the adsorption of metal ions from aqueous media. The synthesis of functionalized calix[4]arene modified silica (FCMS) resin was characterized by FTIR, CHNS, BET surface area, SEM analyses. The FCMS resin has high thermal and chemical stabilities that were checked by the thermogravimetric analysis and various acidic/basic conditions. The efficiency of the FCMS resin was checked by performing a set of batch experiments under optimized parameters such as concentration of the metal solution, pH, resin dosage, time, temperature, and competitive adsorption in mixed solutions. The results showed that better adsorption has been achieved at pH 7, with 25 mg adsorbent dosage and 10 min contact time. The equilibrium kinetic study showed that the metal adsorption follows the pseudo 2nd order kinetic model with quite high coefficients of determination values (R-2 > 0.99). The experimental data have been validated by applying three adsorption isotherm models and the results revealed that the Freundlich isotherm model (R-2 > 0.99) was the best fit for the adsorption of Cu2+, Pb2+, and Cd2+ ions. However, the sorption energy calculated from the D-R isotherm model for Cu2+, Pb2+, and Cd2+ ions suggested that an ion-exchange mechanism is involved on the surface of the FCMS resin. The thermodynamic data demonstrated that the reaction is spontaneous and endothermic. The FCMS resin was also applied on real wastewater samples and the results demonstrated that the resin has a good ability to treat metal-contaminated wastewater. (C) 2021 Elsevier B.V. All rights reserved.